SPRING ASSISTERS

STANDARD COIL SPRING ASSISTER AND RAISER

Coil Spring Assisters are necessary because most standard car springs are designed for comfort of the passengers and are not strong enough for towing and heavy weights carried in the boot

Grayston Coil Spring Assisters and Raisers are manufactured in a hard rubber compound and can be fitted by the average DIY motorist without special tools. They are progressive in operation and are available in four sizes

Part No. To Suit Gap Distance GE 13 GE 14 GE 15 GE 15A to suit 18 to 25mm gap to suit 26 to 38mm gap to suit 39 to 51mm gap to suit 51 to 65mm gap

Note: Gap is determined by the measurement between the coils (daylight) approx halfway down the spring, when the vehicle is jacked up by the body until the wheel is clear off the ground.

Please Ring 020 8974 1122 for advice on your vehicle.

TO UPRATE THE REAR SUSPENSION OF CARS, ESTATES AND LIGHT VANS FOR TOWING CARAVANS, TRAILERS AND VEHICLES CARRYING HEAVY LOADS.